snmpgetnext
To check if there were any results found you have to use the empty() function. The count() function always returns a number 1 or larger.
$walk_result = snmprealwalk($machine_ip, $community, $snmpcodes['interface_names']);
if (empty($walk_result)) {
print "No network interfaces found.<br>\n";
exit(0);
}
snmprealwalk
(PHP 4, PHP 5)
snmprealwalk — Return all objects including their respective object ID within the specified one
Opis
array snmprealwalk
( string $host
, string $community
, string $object_id
[, int $timeout
[, int $retries
]] )
Ostrzeżenie
Ta funkcja jest obecnie nieudokumentowana, dostępna jest jedynie lista jej argumentów.
add a note
User Contributed Notessnmprealwalk
Anonymous
21-May-2008 07:19
21-May-2008 07:19
scot at indievisible dot org
09-Aug-2006 09:10
09-Aug-2006 09:10
Some improvements based on testing a lot of OIDs on a lot of devices.
<?php
function snmptable($host, $community, $oid) {
// TODO: get original state and restore at bottom
snmp_set_oid_numeric_print(TRUE);
snmp_set_quick_print(TRUE);
snmp_set_enum_print(TRUE);
$retval = array();
$raw = snmprealwalk($host, $community, $oid);
if (count($raw) == 0) return ($retval); // no data
$prefix_length = 0;
$largest = 0;
foreach ($raw as $key => $value) {
if ($prefix_length == 0) {
// don't just use $oid's length since it may be non-numeric
$prefix_elements = count(explode('.',$oid));
$tmp = '.' . strtok($key, '.');
while ($prefix_elements > 1) {
$tmp .= '.' . strtok('.');
$prefix_elements--;
}
$tmp .= '.';
$prefix_length = strlen($tmp);
}
$key = substr($key, $prefix_length);
$index = explode('.', $key, 2);
isset($retval[$index[1]]) or $retval[$index[1]] = array();
if ($largest < $index[0]) $largest = $index[0];
$retval[$index[1]][$index[0]] = $value;
}
if (count($retval) == 0) return ($retval); // no data
// fill in holes and blanks the agent may "give" you
foreach($retval as $k => $x) {
for ($i = 1; $i <= $largest; $i++) {
if (! isset($retval[$k][$i])) {
$retval[$k][$i] = '';
}
}
ksort($retval[$k]);
}
return($retval);
}
?>
scot at indievisible dot org
09-Aug-2006 05:16
09-Aug-2006 05:16
Since PHP doesn't have a nice snmptable-like function... here is a quick-and-dirty hack that works for me. Works on complete and sparse tables. The example oids are for the route (complete) and interface (often sparse) tables.
<?php
$a = snmptable("10.1.1.1", "public", ".1.3.6.1.2.1.4.21") or die("error");
print_r($a);
$a = snmptable("10.1.1.1", "public", ".1.3.6.1.2.1.2.2") or die("error");
print_r($a);
function snmptable($host, $community, $oid) {
// TODO: get original state and restore at bottom
snmp_set_oid_numeric_print(TRUE);
snmp_set_quick_print(TRUE);
snmp_set_enum_print(TRUE);
$retval = array();
$raw = snmprealwalk($host, $community, $oid) or die("snmptable: unable to walk OID $oid");
$prefix_length = 0;
foreach ($raw as $key => $value) {
if ($prefix_length == 0) {
// don't just use $oid's length since it may be non-numeric
$prefix_elements = count(explode('.',$oid));
$tmp = '.' . strtok($key, '.');
while ($prefix_elements > 1) {
$tmp .= '.' . strtok('.');
$prefix_elements--;
}
$tmp .= '.';
$prefix_length = strlen($tmp);
}
$key = substr($key, $prefix_length);
$index = explode('.', $key, 2);
isset($retval[$index[1]]) or $retval[$index[1]] = array();
isset($firstrow) or $firstrow = $index[1];
$retval[$index[1]][$index[0]] = $value;
}
// check for holes in the table and fill them in
foreach ($retval[$firstrow] as $key => $tmp) {
foreach($retval as $check => $tmp2) {
if (! isset($retval[$check][$key])) {
$retval[$check][$key] = '';
}
}
}
return($retval);
}
?>
railson at amixsi dot com dot br
30-May-2006 07:52
30-May-2006 07:52
Attention: timeout is in microseconds (multiply by 1,000,000 for seconds)
Stephen Cope
10-Sep-2004 05:38
10-Sep-2004 05:38
Here's a way to find the uptime and number of users on a machine. (Note that uptime is the uptime of the snmpd daemon, which should be fairly close to the uptime for the host.)
<?php
$state = snmprealwalk($host, "public", ".1.3.6.1.2.1.25.1", 50, 1);
$uptime = ereg_replace("^.*\) ([0-9]+ .*):[0-9][0-9]\.[0-9]{2}.*$", "\\1", $state['host.hrSystem.hrSystemUptime.0']);
$users = (int)ereg_replace("Gauge32: ", "", $state['host.hrSystem.hrSystemNumUsers.0']);
printf('<div class="machine"><dt>%s</dt><dd>%s</dd>', $host, $desc);
printf('<dd>up %s</dd>', $uptime);
if ( $users ) printf('<dd>%d user%s</dd>', $users, ($users > 1) ? 's' : '');
printf('</div>');
?>
Lars Troen
24-Feb-2003 02:30
24-Feb-2003 02:30
snmprealwalk indexes the values using the oid instead of an integer. This is useful when you need data that is contained in the oid as well as the value.
Here's an example for retrieving and printing vlan info:
//
// I have collected the vlan identifiers earlier from the 3com mib and they are stored in the $vlan table.
//
for($n=0;$n<count($vlan);$n++){
print $vlan[$n][id]." ".$vlan[$n][name]."<br>\n";
$ifStackStatusTable=@snmprealwalk($switch, $community, ".1.3.6.1.2.1.31.1.2.1.3.".$vlan[$n][id]); // ifMIB.ifMIBObjects.ifStackTable.ifStackEntry.ifStackStatus
for(reset($ifStackStatusTable); $port = key($ifStackStatusTable); next($ifStackStatusTable)){
print "$port=$ifStackStatusTable[$port]<br>";
}